Light bulb and LED replacement.
To replace a defective light bulb or LED, proceed as follows:
Step 1: Turn off the current at the fuse box.
Step 2: Remove the equipment compartment door, behind which the technical devices are installed.
Step 3: Locate the back of the light fixture.
To replace conventional light bulbs:
Step 4: Grasp the light bulb holder (located on the back of the light fixture) and twist counter-clockwise to release the light bulb from the fixture.
Step 5: Remove the light bulb by pulling it straight out of the light bulb holder.
Step 6: Replace the light bulb and reinstall the light bulb holder.
To replace LEDs:
Step 4: Insert a small standard screwdriver into the tabbed slot (see arrow).
Step 5: Carefully pry off the back light fixture cover.
Step 6: Remove the LED assembly by pulling it straight out. Replace the LED. Reinstall the back cover of the light fixture.
For both lighting systems:
Step 7: Remove the equipment compartment door.
Step 8: Restore the electrical power supply.
NOTE: For information on alternative lighting systems, please contact your authorised Villeroy & Boch specialist dealer.